Hyptec GT Climber Edition Electric Sedan 2026: Specifications and Export Enquiry
The Hyptec GT is a battery-electric sedan. This page selects the 2026 Climber Edition, retaining the Chinese factory grade 攀登版. The manufacturer lists alternative battery capacities for this grade; the allocated car’s factory record must identify its actual pack.
Selected manufacturer reference
| Configuration | Manufacturer reference |
|---|---|
| Factory grade / seats | 2026款 攀登版 / five seats |
| Dimensions / wheelbase | 4,886 × 1,885 × 1,449 mm / 2,920 mm |
| Drive / motor | RWD; 250 kW / 430 Nm |
| Battery | LFP; factory table specifies 80 / 83.3 kWh |
| Factory combined-working-condition range | 710 km |
| Voltage | 800 V platform |
| Suspension | Front double-wishbone / rear five-link |
| Brakes | Front fixed four-piston calipers |
| Luggage | 450 L; front luggage compartment absent |
| Options | Massage and rear heating are listed as optional temporary gifts |
Manufacturer test figures apply to the stated configuration and test conditions. CLTC is a laboratory cycle; actual range varies with temperature, speed, load, tyres and battery condition. Electric-only range and combined fuel-and-battery range are different measures.
Choosing this vehicle for your market
Confirm which battery capacity is allocated before accepting a quotation and record the supplier’s evidence alongside the VIN. Do not describe temporary gifts as guaranteed standard equipment. Review luggage, cabin access and charging compatibility against the intended use. Ask the inspection team to document fitted wheels, seats and charging equipment, and arrange local service and parts support. A clear configuration sheet makes different supplier offers easier to compare without adding duplicate catalogue pages.
Specification and inspection before shipment
Keep the original factory grade name in the purchase specification. Confirm production date, VIN when allocated, seat layout, battery or engine record, transmission, wheels and options. Require photographs of the offered exterior and cabin and a recorded pre-shipment inspection. For an electrified vehicle, record both charging inlets and agree a practical charging check. Confirm connected services, driver assistance and local service support for the destination.
Plan the Hyptec GT Climber Edition Electric Sedan 2026 order
Confirm the installed AC and DC ports, onboard-charger limits and a charging demonstration with the intended equipment. Keep laboratory-cycle range with its test conditions when planning the daily route. Check rear-seat access, luggage opening and the road clearance needed on the operating route.
For this Hyptec GT Climber Edition Electric Sedan 2026 enquiry, match the VIN, factory grade, production date and disclosed condition to the accepted specification. Review charging checks and the destination import guides before committing the order.
Compare brands and model families, then send the exact configuration, quantity and destination for an itemized quotation. Include the inspection scope, shipment term and local service requirements.
Request an itemized export quotation
Send the exact model and grade, quantity, preferred colours, destination country and port. Ask for a written scope covering the vehicle, inspection, export documents and shipping, with destination charges stated separately. Your local importer should approve eligibility and registration for the allocated specification before purchase.
Request a Hyptec GT sourcing quotation →
Source: Hyptec official GT configuration table. Source checked 9 October 2026. Image: official manufacturer model-family reference, not evidence of allocated stock, colour, equipment or this exact grade. Later production changes must be matched to the final factory record.
Additional official reference: Hyptec official GT model introduction.