Buick Encasa 601 km BEV MPV China Version: Specifications and Export Enquiry
This page selects the fully electric Buick Encasa announced by General Motors China in March 2026. It is a separate powertrain choice from the plug-in hybrid Encasa. The reference identifies the 96 kWh battery and 601 km CLTC figure without transferring hybrid engine, torque or fuel-range data into the electric specification.
Selected manufacturer reference
| Configuration | Manufacturer reference |
|---|---|
| Selected powertrain | Battery electric Encasa MPV |
| Battery capacity | 96 kWh |
| CLTC electric range | 601 km |
| Electrical architecture | 900V |
| Manufacturer charging capability | 6C |
| Peak DC charging power | Up to 640 kW under optimal conditions |
| DC charge, 10–80% | Approximately 11.5 minutes under optimal conditions |
| Cabin format | Three rows |
| Drag coefficient | 0.258 |
| Driving assistance platform | Momenta R6; destination functionality to be verified |
Manufacturer test figures apply to the stated configuration and test conditions. CLTC is a laboratory cycle; actual range varies with temperature, speed, load, tyres and battery condition. Electric-only range and combined fuel-and-battery range are different measures.
Choosing this vehicle for your market
For a passenger shuttle or executive fleet, obtain the exact factory grade and approved seat count before comparing offers. The manufacturer charging headline requires suitable high-power equipment and favourable battery conditions; ask what charging rate the intended route can deliver. Request allocated-vehicle dimensions, axle loads and the battery record for homologation rather than treating the hybrid data sheet as proof of electric-vehicle compliance.
Specification and inspection before shipment
Keep the original factory grade name in the purchase specification. Confirm production date, VIN when allocated, seat layout, battery or engine record, transmission, wheels and options. Require photographs of the offered exterior and cabin and a recorded pre-shipment inspection. For an electrified vehicle, record both charging inlets and agree a practical charging check. Confirm connected services, driver assistance and local service support for the destination.
Plan the Buick Encasa 601 km BEV MPV import specification
Record the installed AC and DC charging inlets, supported electrical limits and onboard-charger specification. Agree a charging demonstration with the intended equipment; a connector photograph or peak-power headline alone does not establish interoperability.
Explore Buick model enquiries and the country import-guide directory before finalizing the shortlist. Keep the approval route and the final delivery location with the vehicle specification. Review the charging checks for the operating plan.
Compare separately: Buick Encasa AWD Seven Seat PHEV China Version. Match each page to its own powertrain, seats and factory grade.
Request an itemized export quotation
Send the exact model and grade, quantity, preferred colours, destination country and port. Ask for a written scope covering the vehicle, inspection, export documents and shipping, with destination charges stated separately. Your local importer should approve eligibility and registration for the allocated specification before purchase.
Request a Buick Encasa sourcing quotation →
Source: General Motors China electric Encasa launch notice, 17 March 2026. Source checked 9 October 2026. Image: official manufacturer model-family reference, not evidence of allocated stock, colour, equipment or this exact grade. Later production changes must be matched to the final factory record.