Exeed EX7 100 kWh RWD Max BEV China Version: Specifications and Export Enquiry
This EX7 reference selects the battery-electric rear-wheel-drive 100 kWh Max. The factory table gives an actual battery capacity of 100.26 kWh. The catalogue keeps this as the electric choice in the broader ET/EX7 family rather than adding several closely overlapping electric grades.
Selected manufacturer reference
| Configuration | Manufacturer reference |
|---|---|
| Factory grade | 纯电两驱100kWh Max |
| Length / width / height | 4988 / 1975 / 1710 mm |
| Wheelbase | 3000 mm |
| Drive / electric motor | Rear-wheel drive; 230 kW, 425 Nm |
| Battery capacity | 100.26 kWh; grade marketed as 100 kWh |
| Battery type / cell maker | Ternary lithium; CATL |
| CLTC electric range | 726 km |
| CLTC energy consumption | 14.0 kWh/100 km |
| 0–100 km/h | 6.4 seconds |
| Suspension | Front double wishbone; rear five-link |
| Damping | CDC in the selected manufacturer column |
| Air suspension | Not standard in this selected RWD column |
Manufacturer test figures apply to the stated configuration and test conditions. CLTC is a laboratory cycle; actual range varies with temperature, speed, load, tyres and battery condition. Electric-only range and combined fuel-and-battery range are different measures.
Choosing this vehicle for your market
Use the complete original grade name when requesting stock. The selected RWD version has different acceleration, range and suspension equipment from the AWD top grade. Confirm the actual wheel and tyre package, charge-inlet standard, battery record and destination approval. Do not add air suspension to an offer merely because it appears in an EX7 family advertisement.
Specification and inspection before shipment
Keep the original factory grade name in the purchase specification. Confirm production date, VIN when allocated, seat layout, battery or engine record, transmission, wheels and options. Require photographs of the offered exterior and cabin and a recorded pre-shipment inspection. For an electrified vehicle, record both charging inlets and agree a practical charging check. Confirm connected services, driver assistance and local service support for the destination.
Plan the Exeed EX7 100 kWh RWD MAX import specification
Record the installed AC and DC charging inlets, supported electrical limits and onboard-charger specification. Agree a charging demonstration with the intended equipment; a connector photograph or peak-power headline alone does not establish interoperability.
Explore Exeed model enquiries and the country import-guide directory before finalizing the shortlist. Keep the approval route and the final delivery location with the vehicle specification. Review the charging checks for the operating plan.
Request an itemized export quotation
Send the exact model and grade, quantity, preferred colours, destination country and port. Ask for a written scope covering the vehicle, inspection, export documents and shipping, with destination charges stated separately. Your local importer should approve eligibility and registration for the allocated specification before purchase.
Request an Exeed EX7 sourcing quotation →
Source: Exeed EX7 official configuration table, 纯电两驱100kWh Max column. Source checked 9 October 2026. Image: official manufacturer model-family reference, not evidence of allocated stock, colour, equipment or this exact grade. Later production changes must be matched to the final factory record.