BEIJING EU8 501 Mobility Electric Sedan 2026: Specifications and Export Enquiry
The BEIJING EU8 is a battery-electric sedan offered in charging and battery-swap configurations. This listing selects the factory 501km Mobility grade with fixed charging. The separate 535km swapping variant has different motor output and charging equipment and is not the reference for this enquiry.
Selected manufacturer reference
| Configuration | Manufacturer reference |
|---|---|
| Factory grade | 501km 出行版 / 501 Mobility; fixed charging configuration |
| Dimensions / wheelbase | 4,850 × 1,900 × 1,485 mm / 2,875 mm |
| Motor output / torque | 150 kW / 255 Nm |
| Battery chemistry / range | Lithium iron phosphate / 501 km CLTC |
| DC charging | 30–80% in ≤21 minutes at 25°C |
| AC charging | 0–100% in ≤9.5 hours at 25°C |
| Thermal equipment | Heat-pump air conditioning; battery temperature management |
| Driver comfort | Six-way powered seat, four-way powered lumbar support and ventilation |
| Parking equipment | Rear camera and rear parking sensors |
| Wheels / restraint option | 215/55 R17 steel wheels with covers; front side airbags optional |
Manufacturer test figures apply to the stated configuration and test conditions. CLTC is a laboratory cycle; actual range varies with temperature, speed, load, tyres and battery condition. Electric-only range and combined fuel-and-battery range are different measures.
Choosing this vehicle for your market
A fixed-charge configuration can be assessed against a local depot without assuming access to a Chinese battery-swapping network. Evaluate daily route energy, charger availability and workshop support before selecting a fleet quantity. The current table does not state battery capacity, so obtain that figure from the allocated vehicle record. Specify the optional side airbags explicitly if required. Confirm the offered cabin and all service terms; Chinese fleet warranty promotions need separate destination acceptance.
Specification and inspection before shipment
Keep the original factory grade name in the purchase specification. Confirm production date, VIN when allocated, seat layout, battery or engine record, transmission, wheels and options. Require photographs of the offered exterior and cabin and a recorded pre-shipment inspection. For an electrified vehicle, record both charging inlets and agree a practical charging check. Confirm connected services, driver assistance and local service support for the destination.
Plan the BEIJING EU8 501 Mobility Electric Sedan 2026 order
Confirm the installed AC and DC ports, onboard-charger limits and a charging demonstration with the intended equipment. Keep laboratory-cycle range with its test conditions when planning the daily route. Check rear-seat access, luggage opening and the road clearance needed on the operating route.
For this BEIJING EU8 501 Mobility Electric Sedan 2026 enquiry, match the VIN, factory grade, production date and disclosed condition to the accepted specification. Review charging checks and the destination import guides before committing the order.
Compare brands and model families, then send the exact configuration, quantity and destination for an itemized quotation. Include the inspection scope, shipment term and local service requirements.
Request an itemized export quotation
Send the exact model and grade, quantity, preferred colours, destination country and port. Ask for a written scope covering the vehicle, inspection, export documents and shipping, with destination charges stated separately. Your local importer should approve eligibility and registration for the allocated specification before purchase.
Request a BEIJING EU8 sourcing quotation →
Source: BEIJING EU8 official four-grade configuration table. Source checked 9 October 2026. Image: official manufacturer model-family reference, not evidence of allocated stock, colour, equipment or this exact grade. Later production changes must be matched to the final factory record.