Arcfox Beta S3 560 MAX Charging EV 2026: Specifications and Export Enquiry
The Beta S3 is Arcfox’s electric sedan. This page chooses the 560 MAX charging version. Its fixed charging configuration is kept separate from the battery-swap edition and the longer-range or lidar-equipped configurations.
Selected manufacturer reference
| Configuration | Manufacturer reference |
|---|---|
| Selected grade | 560 MAX 充电版 — charging version |
| Drive / motor | Front-wheel drive; manufacturer power ≥159 kW; 250 Nm |
| Battery chemistry | Lithium iron phosphate; confirm allocated battery record |
| Electric range | 560 km CLTC |
| Dimensions / wheelbase | 4,916 × 1,900 × 1,480 mm / 2,876 mm |
| DC charging reference | 30–80% in ≤21 minutes under stated conditions |
| AC charging reference | 0–100% in ≤10 hours under stated conditions |
| Battery thermal equipment | Heat pump listed in the selected configuration |
Manufacturer test figures apply to the stated configuration and test conditions. CLTC is a laboratory cycle; actual range varies with temperature, speed, load, tyres and battery condition. Electric-only range and combined fuel-and-battery range are different measures.
Choosing this vehicle for your market
The official table states motor output as at least 159 kW; this listing preserves that wording. The source does not give a usable battery-capacity figure for this column, so the final factory record should establish the allocated pack. Do not combine the 560 MAX with the 660 configuration’s range or future lidar grade. Verify connectivity, charging and software availability overseas.
Specification and inspection before shipment
Keep the original factory grade name in the purchase specification. Confirm production date, VIN when allocated, seat layout, battery or engine record, transmission, wheels and options. Require photographs of the offered exterior and cabin and a recorded pre-shipment inspection. For an electrified vehicle, record both charging inlets and agree a practical charging check. Confirm connected services, driver assistance and local service support for the destination.
Plan the Arcfox Beta S3 560 MAX Charging EV 2026 order
Confirm the installed AC and DC ports, onboard-charger limits and a charging demonstration with the intended equipment. Keep laboratory-cycle range with its test conditions when planning the daily route. Check rear-seat access, luggage opening and the road clearance needed on the operating route.
For this Arcfox Beta S3 560 MAX Charging EV 2026 enquiry, match the VIN, factory grade, production date and disclosed condition to the accepted specification. Review charging checks and the destination import guides before committing the order.
Compare Arcfox enquiries, then send the exact configuration, quantity and destination for an itemized quotation. Include the inspection scope, shipment term and local service requirements.
Request an itemized export quotation
Send the exact model and grade, quantity, preferred colours, destination country and port. Ask for a written scope covering the vehicle, inspection, export documents and shipping, with destination charges stated separately. Your local importer should approve eligibility and registration for the allocated specification before purchase.
Request a Arcfox Beta S3 sourcing quotation →
Source: Arcfox official Beta S3 configuration table, 560 MAX 充电版 column. Source checked 9 October 2026. Image: official manufacturer model-family reference, not evidence of allocated stock, colour, equipment or this exact grade. Later production changes must be matched to the final factory record.
Additional official reference: Official manufacturer model reference.